Description
Infra-red beam is suitable for automatic door, it provides safety protection to people pass through.
The safe beam can be installed at all kinds of door frames because of its small size.
In addition, microprocessor operating system redefines the safety standards to protect pedestrians,
and develops a new smarter and higher performance range.
Technical Data
Technical: infra-red, microprocessor
Installation height: Min 0.2m above floor
Distance between beams: Min. 0.2m(reverse beam)
Distance to door face: 2 cm
Min. range: 1 m
Max. range: 5m( installed at height of 0.2m)
avertence angle: 8 °
Detection mode: cut off beam
Reaction time:
Relay output: ≤ 40ms
Hold time:
Relay output: 300ms
Power voltage: 12-24V AC±10%
12-24V DC±10%
Power consumption: <1 W
Signal display: each beam has a light on the
controller box
Adjustment:( turn DIP switch)
1 single/double beam
Environment temperature: -20ºC~+55ºC
Wire length: 5m
single beam double beam
choose installation height
make a height mark
beam is above floor at least 20cm
choose installation height 1 & 2
distance between h1 & h2
at least 30cm
make marks h1 & h2
beam is above floor at least 20cm
drill a vertical hole 13mm(or 1/2") on
each side of the frame
drill two vertical holes 13mm(or 1/2")
on each side of the frame
Detector wire colors
receiver: white/black
sender: white/black
Wire colors
receiver: black
sender: gray
Audited Supplier 
){kind=link}
){kind=link}